Filters
We stock a wide range of replacement water filters.
Please select another category for more information.
If we do not have the filter you are looking for please contact us and we will try source it or provide you with an alternative.
Please select another category for more information.
If we do not have the filter you are looking for please contact us and we will try source it or provide you with an alternative.
GAC Cartridge 20" Standard Refillable (GAC-20)
MICROFIL 20" GAC (Granular Activated Carbon)
- Chlorine & Heavy Metal Reduction.
- Reduces unwanted taste and odours.
- Refillable.
Refillable high quality coconut-shell granular activated carbon filter.
Add to Cart
R206.10
Dual KDF Cartridge 10" (Polypropylene+KDF+GAC) (DUALCKDF)
For information on KDF and all the extra impurities KDF removes please click here.
Dual Cartridge with Polypropelene and KDF+GAC.
- Reduces Chlorine & Heavy Metals.
- Reduces sediment (sand, dirt, etc.)
- Eliminates Odours & Improves Taste.
For information on KDF and all the extra impurities KDF removes please click here.
Reduces sediment, Chlorine and heavy metals, improves odour and taste.
Add to Cart
R207.00
Linear Polypropylene Cartridge (RO-PP)
Uses:
- As an additional stage for fridges.
- In-Line Dispenser.
Same housing design as the linear carbon or T33 cartridges.
Contains a polypropylene sediment filter.
- Reduces Sediment, sand, dirt, rust, etc...
Product may or may not have a label.
Do not use where the water is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit.
Reduces sediment.
Add to Cart
R172.50
Dual Cartridge 10" (Polypropylene+GAC) (DUALC2)
Dual Cartridge with Polypropelene and G.A.C. (Granular Activated Carbon).
- Reduces Chlorine & Heavy Metals.
- Reduces sediment (sand, dirt, etc.)
- Eliminates Odours & Improves Taste.
Reduces sediment, Chlorine and heavy metals, improves odour and taste.
Add to Cart
R172.50
300GPD Reverse Osmosis Membrane (RO-MEM300)
Due to multiple suppliers and brands we can not list the specifications, they are used in domestic 300GPD and 400GPD RO systems, be sure to select the correct housing size 3012 or 3013.
Confirm the size by checking the model number of your previous membrane.
Available in 3012 and 3013.
Add to Cart
R1,610.00
VONTRON 75GPD Reverse Osmosis Membrane (RO-M75GPDV)
Vontron ULP1812-75 Reverse Osmosis Membrane.
This membrane is rated at 75 Gallons per day (280 litres per day).
- Fits in standard 1.8" x 12" residential RO membrane housings.
VONTRON® Residential Membrane Elements
Brief Introduction
The 1812-sized and 2012-sized residential membrane elements are mainly applicable to various small-sized systems, such as household water purifier and other water purifying devices in hospital and laboratory.
Being suitable for the desalting treatment of those water sources with salt concentration lower than 2000 ppm, such as surface water, underground water, tap water and municipal water, etc., ULP series are mainly applicable to numerous applications of various sizes, such as pure water, boiler water replenishment, foodstuff processing, and pharmaceutical production, etc.
Being suitable for the desalting treatment of those water sources with salt concentration lower than 2000 ppm, such as surface water, underground water, tap water and municipal water, etc., ULP series are mainly applicable to numerous applications of various sizes, such as pure water, boiler water replenishment, foodstuff processing, and pharmaceutical production, etc.
Specifications and Major Properties
Active Membrane Area ft²(m²): 3.5(0.32)
Average Permeated Flow: 75 GPD
Stable Rejection Rate: 97.5%
Minimum Rejection Rate: 96.0%
Average Permeated Flow: 75 GPD
Stable Rejection Rate: 97.5%
Minimum Rejection Rate: 96.0%
Testing Conditions:
Testing Pressure 60 psi (0.41Mpa)
Temperature of Testing Solution 25°C
Concentration of Testing Solution (NaCl) 250ppm
pH Value of Testing Solution 7.5
Recovery Rate of Single Membrane Element 15%
Temperature of Testing Solution 25°C
Concentration of Testing Solution (NaCl) 250ppm
pH Value of Testing Solution 7.5
Recovery Rate of Single Membrane Element 15%
Extreme Operation Conditions:
Max. Working Pressure: 300psi(2.07Mpa)
Max. Feedwater Temperature: 45°C
Max. Feedwater SDI: 5
Free Chlorine Concentration of Feedwater <0.1ppm
pH Range of Feedwater during Continuous Operation: 3~10
pH Range of Feedwater during Chemical Cleaning: 2~12
Max. Pressure Drop of Single Membrane Element: 10psi(0.07Mpa)
Max. Feedwater Temperature: 45°C
Max. Feedwater SDI: 5
Free Chlorine Concentration of Feedwater <0.1ppm
pH Range of Feedwater during Continuous Operation: 3~10
pH Range of Feedwater during Chemical Cleaning: 2~12
Max. Pressure Drop of Single Membrane Element: 10psi(0.07Mpa)
Important Information
1. Any specific application must be limited within the extreme operating conditions. We strongly recommend you to refer to the latest edition of technology manual and design guide prepared by Vontron Technology Co., Ltd., or consult experts proficient in membrane technology. In case the customer fails to follow the operating conditions as specified in this manual, Vontron technology Co., Ltd. will assume no liability for all results.
2. The permeate flow listed in the table is the average value. The permeate flow of single membrane element is within a tolerance not exceeding ±20% of the nominal value.
3. All wet-type membrane elements have been strictly tested before leaving the factory, and have been treated with the solution of 1.0% sodium hydrogen sulfite (an antifreeze solution of 10% propanediol required in winter) for storage purpose, then sealed with plastic bag in vacuum, and further packed in carton boxes. In order to prevent the breeding of microbes during short-time storage, transportation and system standby, we recommend you to soak the membrane elements with protective solution (prepared with RO filtered water) containing 1.0% sodium hydrogen sulfite (foodstuff-purpose).
4. Discard the RO-filtered water produced during the first one hour after system start-up.
5. During storage time and run time, it is strictly prohibited to dose any chemical medicament that may be harmful.
2. The permeate flow listed in the table is the average value. The permeate flow of single membrane element is within a tolerance not exceeding ±20% of the nominal value.
3. All wet-type membrane elements have been strictly tested before leaving the factory, and have been treated with the solution of 1.0% sodium hydrogen sulfite (an antifreeze solution of 10% propanediol required in winter) for storage purpose, then sealed with plastic bag in vacuum, and further packed in carton boxes. In order to prevent the breeding of microbes during short-time storage, transportation and system standby, we recommend you to soak the membrane elements with protective solution (prepared with RO filtered water) containing 1.0% sodium hydrogen sulfite (foodstuff-purpose).
4. Discard the RO-filtered water produced during the first one hour after system start-up.
5. During storage time and run time, it is strictly prohibited to dose any chemical medicament that may be harmful.
High quality RO membrane.
Add to Cart
R493.35
String Wound Sediment Filter 20" Standard (PFCSW20)
Reduces sediment ie: sand, dirt, rust, etc...
Reduces Sediment.
Add to Cart
R92.00
Multi-Stage Cartridge Filter for Gravity Systems (MRP001)
These are used in our mineral pots to remove chlorine, heavy metals, etc, they also fit in certain dispenser filter bottles.
Stages:
- Silver Activated Carbon
- Silica Sand
- Zeolite
- Mineral Sand
Commonly used in counter-top gravity based water filters/dispensers.
*May or may not include retail box.
*May differ to image due to multiple suppliers.
*Fits our mineral pots, may not fit other brands.
Reduces Chlorine and heavy metals and adds minerals, improving odour and taste.
Add to Cart
R115.00
Replacement Filter for 15L Filter Bottle (FBFPT15)
Replacement filter for the 15L Filter Bottle.
Has o-ring and ceramic filter at bottom of cartridge as shown in image.
Reduces Chlorine and heavy metals, improves odour and taste.
Add to Cart
R138.00
Carbon Block Nano Silver 10" 5um Standard Antibacterial Cartridge (CB10NS)
☆ Unique Advantages ☆
☆ Medical Grade High-End Technology, Anti-germs cloth is composed of Nano- Silver, Nano-Copper, Titanium Alloy Film
and KX Matrikx NSF high quality CTO carbon block filter.
☆ Anti-Bacteria up to 99.9% against Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Candida Albicans.
☆ Efficiently Remove Heavy Metal such as Lead (Pb), Chromium (Cr), Cadmium (Cd)…etc.
☆ The Filter is tested by INTERTEK / SGS / private biotechnology laboratory.
Features:
- Multilayer Nano ACT (Ag. Cu. Ti.) Complex Thin Film combined with KX Matrikx CTO Carbon Block Filter.
- Effective in Reducing Heavy Metal such as Lead (Pb), Mercury (Hg), Chromium (Cr), Cadmium (Cd).
- SGS tested report proves the specific migration of silver under US FDA standards.
- Chlorine and Odor Removal and Antibacterial Service Life.
Specification:
| Item no. | Nano-ACT20 |
| Description | 10” Nano-ACT Carbon Block CTO Filter |
| Dimension | OD 2-¾inch(70mm) X Length 20inch(508mm) |
| Carbon Filter | NSF/ANSI Standards 42 , KX Carbon Block Filter Inside |
| Inner parts | Multilayer AgCuTi Complex Thin Film Filter Inside |
| Nettings | Polyethylene, Silvery |
| Maxi. Temp. | 125℉ (51℃) |
| Notes | Performance is dependent on influent water quality, flow rates, system design and applications. |
| Notes | Recommended for use on municipal supply. |
Removes bacteria, Chlorine and heavy metals. Improves odour and taste.
Add to Cart
R368.00
VONTRON 50GPD Reverse Osmosis Membrane (RO-M50GPDV)
Vontron ULP1812-50 Reverse Osmosis Membrane.
This membrane is rated at 50 Gallons per day (180 litres per day).
- Fits in standard 1.8" x 12" residential RO membrane housings.
VONTRON® Residential Membrane Elements
Brief Introduction
The 1812-sized and 2012-sized residential membrane elements are mainly applicable to various small-sized systems, such as household water purifier and other water purifying devices in hospital and laboratory.
Being suitable for the desalting treatment of those water sources with salt concentration lower than 2000 ppm, such as surface water, underground water, tap water and municipal water, etc., ULP series are mainly applicable to numerous applications of various sizes, such as pure water, boiler water replenishment, foodstuff processing, and pharmaceutical production, etc.
Being suitable for the desalting treatment of those water sources with salt concentration lower than 2000 ppm, such as surface water, underground water, tap water and municipal water, etc., ULP series are mainly applicable to numerous applications of various sizes, such as pure water, boiler water replenishment, foodstuff processing, and pharmaceutical production, etc.
Specifications and Major Properties
Active Membrane Area ft²(m²): 3.5(0.32)
Average Permeated Flow: 50 GPD
Stable Rejection Rate: 97.5%
Minimum Rejection Rate: 96.0%
Average Permeated Flow: 50 GPD
Stable Rejection Rate: 97.5%
Minimum Rejection Rate: 96.0%
Testing Conditions:
Testing Pressure 60 psi (0.41Mpa)
Temperature of Testing Solution 25°C
Concentration of Testing Solution (NaCl) 250ppm
pH Value of Testing Solution 7.5
Recovery Rate of Single Membrane Element 15%
Temperature of Testing Solution 25°C
Concentration of Testing Solution (NaCl) 250ppm
pH Value of Testing Solution 7.5
Recovery Rate of Single Membrane Element 15%
Extreme Operation Conditions:
Max. Working Pressure: 300psi(2.07Mpa)
Max. Feedwater Temperature: 45°C
Max. Feedwater SDI: 5
Free Chlorine Concentration of Feedwater <0.1ppm
pH Range of Feedwater during Continuous Operation: 3~10
pH Range of Feedwater during Chemical Cleaning: 2~12
Max. Pressure Drop of Single Membrane Element: 10psi(0.07Mpa)
Max. Feedwater Temperature: 45°C
Max. Feedwater SDI: 5
Free Chlorine Concentration of Feedwater <0.1ppm
pH Range of Feedwater during Continuous Operation: 3~10
pH Range of Feedwater during Chemical Cleaning: 2~12
Max. Pressure Drop of Single Membrane Element: 10psi(0.07Mpa)
Important Information
1. Any specific application must be limited within the extreme operating conditions. We strongly recommend you to refer to the latest edition of technology manual and design guide prepared by Vontron Technology Co., Ltd., or consult experts proficient in membrane technology. In case the customer fails to follow the operating conditions as specified in this manual, Vontron technology Co., Ltd. will assume no liability for all results.
2. The permeate flow listed in the table is the average value. The permeate flow of single membrane element is within a tolerance not exceeding ±20% of the nominal value.
3. All wet-type membrane elements have been strictly tested before leaving the factory, and have been treated with the solution of 1.0% sodium hydrogen sulfite (an antifreeze solution of 10% propanediol required in winter) for storage purpose, then sealed with plastic bag in vacuum, and further packed in carton boxes. In order to prevent the breeding of microbes during short-time storage, transportation and system standby, we recommend you to soak the membrane elements with protective solution (prepared with RO filtered water) containing 1.0% sodium hydrogen sulfite (foodstuff-purpose).
4. Discard the RO-filtered water produced during the first one hour after system start-up.
5. During storage time and run time, it is strictly prohibited to dose any chemical medicament that may be harmful.
2. The permeate flow listed in the table is the average value. The permeate flow of single membrane element is within a tolerance not exceeding ±20% of the nominal value.
3. All wet-type membrane elements have been strictly tested before leaving the factory, and have been treated with the solution of 1.0% sodium hydrogen sulfite (an antifreeze solution of 10% propanediol required in winter) for storage purpose, then sealed with plastic bag in vacuum, and further packed in carton boxes. In order to prevent the breeding of microbes during short-time storage, transportation and system standby, we recommend you to soak the membrane elements with protective solution (prepared with RO filtered water) containing 1.0% sodium hydrogen sulfite (foodstuff-purpose).
4. Discard the RO-filtered water produced during the first one hour after system start-up.
5. During storage time and run time, it is strictly prohibited to dose any chemical medicament that may be harmful.
High quality RO membrane.
Add to Cart
R747.50
GAC Cartridge 20" BigBlue Refillable (GAC-BB)
*Note: Filter may differ slightly to image, sometimes they come in blue housings.
MICROFIL 20" GAC (Granular Activated Carbon) Coconut Shell based.
- Chlorine & Heavy Metal Reduction.
- Reduces unwanted taste and odours.
- Refillable.
*Note: Filter may differ slightly to image, sometimes they come in blue housings.
Refillable high quality coconut-shell granular activated carbon filter.
Add to Cart
R575.00
Tannin Removal Filter Cartridge 20" (TAN20)
This cartridge reduces flow rate and should not be used on in-line whole house systems.
NOTE: We have no experience with this filter and can't guarantee its effectiveness or lifespan, it is available for purchase as it has been requested in the past, we recommend having your water tested first and sending us the test results for us to determine if this filter will be suitable.
The media used in this filter is usually used in a vessel where it is regenerated and reused, the media in this filter can't be automatically regenerated so it will have to be replaced or regenerated manually.
*Cartridge may differ to image. 10" and 20" BB are also available on request.
20" Standard Tannin Removal Filter Cartridge.
- Reduces or removes colour from water caused by tannins.
- Refillable.
This cartridge reduces flow rate and should not be used on in-line whole house systems.
NOTE: We have no experience with this filter and can't guarantee its effectiveness or lifespan, it is available for purchase as it has been requested in the past, we recommend having your water tested first and sending us the test results for us to determine if this filter will be suitable.
The media used in this filter is usually used in a vessel where it is regenerated and reused, the media in this filter can't be automatically regenerated so it will have to be replaced or regenerated manually.
*Cartridge may differ to image. 10" and 20" BB are also available on request.
Colour Removal Resin Filter Cartridge
Enquire
R529.92
Carbon Block 10" BigBlue (CBBB10)
MICROFIL 10" Carbon Block Big Blue
- Chlorine Reduction.
- Reduces unwanted taste and odours.
Reduces Chlorine and heavy metals. Improves odour and taste.
Add to Cart
R216.89
Polypropylene Sediment Filter 10" BigBlue (PFCBB10)
MICROFIL Polypropylene Cartridge 10" BigBlue
Features and Benefits
- Thermally bonded polypropylene micro fibers for purity and chemical compatibility
- Contains no binders, agents, solvents, antistatic materials or wetting agents
- Meets FDA requirements for food and beverage contact
- No leachables or extractables to contaminate
- Long life and increased dirt holding capacity
- No surface binders to reduce flow and increase change-out frequency
- Available in wide range of lengths and micron ratings
Applications
- Food and beverages
- Reverse Osmosis Prefiltration
- Oil and gas
- Fine chemicals
- Electronics
- Metal finishing
- Pulp and paper
Standard spun polypropylene sediment filter cartridge for whole house water filters for removal of dirt, rust & sediment.
Reduces sediment.
Add to Cart
R120.75
String Wound Sediment Filter 20" BigBlue (PFCSW20)
Reduces sediment ie: sand, dirt, rust, etc...
Reduces Sediment.
Add to Cart
R367.08
Empty Refillable Cartridge 10" (EC-10)
The empty refillable cartridge allows you to use your own media and just replace the media instead of buying new cartridges often or if you can't find a cartridge which contains the specific media you want to use.
The empty cartridge will fit in the 10" Standard Housing or 10" Big Blue Housing as you select.
*Cartridges and colours may vary due to multiple suppliers.
The empty cartridge will fit in the 10" Standard Housing or 10" Big Blue Housing as you select.
*Cartridges and colours may vary due to multiple suppliers.
Empty cartridge to be filled with your own media.
Add to Cart
R100.05
Polypropylene Sediment Filter 10" Standard (PFC10)
MICROFIL Polypropylene Sediment Filter Cartridge 10"
Features and Benefits
- Thermally bonded polypropylene micro fibers for purity and chemical compatibility
- Contains no binders, agents, solvents, antistatic materials or wetting agents
- Meets FDA requirements for food and beverage contact
- No leachables or extractables to contaminate
- Long life and increased dirt holding capacity
- No surface binders to reduce flow and increase change-out frequency
- Available in wide range of lengths and micron ratings
Applications
- Food and beverages
- Reverse Osmosis Prefiltration
- Oil and gas
- Fine chemicals
- Electronics
- Metal finishing
- Pulp and paper
Standard spun polypropylene sediment filter cartridge for whole house water filters for removal of dirt, rust & sediment.
Reduces sediment.
Add to Cart
R59.51
String Wound Sediment Filter 10" Standard (PFCSW10)
Reduces sediment ie: sand, dirt, rust, etc...
Reduces sediment.
Add to Cart
R62.91
Linear Polypropylene Cartridge K-Type (RO-PP1)
Uses:
- As an additional stage for fridges.
- In-Line Dispenser.
Contains a polypropylene sediment filter.
- Reduces Sediment, sand, dirt, rust, etc...
Do not use where the water is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit.
Reduces sediment.
Add to Cart
R172.50