Reverse Osmosis Spares
RO Spares & Accessories
This system works with any 10" Single, Dual or Triple Stage Under-Counter Filtration System or RO (Reverse Osmosis) System.
Standard 1/4" Inlet and Outlet.
The leaked-water accumulates in the holding tray and triggers shutoff of the supply.
*Does not include the RO system shown in the image.
Video Demonstration:
Used directly on copper pipe to attach 1/4" tubing for RO or under counter filtration systems without needing to cut the copper pipe or use additional tools or fittings.
The clamp is secured around the copper pipe and a needle-like fixture pierces the copper pipe to allow the water to flow out the 1/4" adapter where 1/4" tubing is attached.
The faucet can be turned to shut off flow also functioning as a shutoff valve.
Fits both 15mm and 22mm copper pipes.
*actual product may differ slightly to image.
Used in domestic RO systems.
Solenoid Valve 24V DC Normally Closed.
We have multiple suppliers for these so they may differ to the pictures.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.
Automatically shuts off the water supply when the tank pressure (or permeate pressure) reaches ~65% of the incoming line pressure.
Without a shut-off block (or solenoid in case of RO with pump) the RO would be wasting water permanently even when the tank is full.
- Normally Closed.
*Note: The optional "1/4" Female Thread (Black) 15A" can be used with two of the 1/4" Thread to 3/8" Tubing Adapters for use with 300GPD and up RO units.
Empty In-Line Housing with 1/4" Threads for use with Candle Filter Types.
Uses a rubber o-ring seal.
Can also be used as an empty housing for filter media (such as ion-exchange resin) if you use two sponges.
Not recommended where pressure may exceed 4 bars without using a pressure reducing valve.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.
May differ from image due to multiple suppliers.
- Constant pressure invention design.
- Extend the life of RO membrane.
- Solution for water pressure fluctuation problem.
- Suitable pipe pressure 10-50 psi.
- No influence from climate and temperature.
- No decompression.
- No water leakage problem.
- Stable current makes transformer's life longer than other booster pump.
- Constant pressure technology to ensure stable pressure work on RO membrane.
Material: Cast Iron, EPDM, Santoprene, Nylon
Function: Booster Pump
Performance: No Leak
Flow: 1.6L/M @70psi
Outlet Pressure: Constant @ 70psi
Port: 3/8" FTP
Certificate: Ce, RoHS
Trademark: E-CHEN
Origin: China
Power: Electric
Liquid Media: Water
RO Capacity: 100-200 GPD
Inlet Pressure: 10psi - 50psi
Voltage: 24VDC
Adapter: 3A (Included)
Patent Product: Yes
Specification: 210x104x99mm, 2.2kg
Reverse Osmosis Membrane Housing.
Fits 300GPD membranes.
We recommend using the one-way check valve on the permeate to prevent reverse flow.
*Product may differ slightly to image.
Cap only which includes 2 rubber seals.
Image shown is a 4040 end cap for illustration only.
Cap only which includes 2 rubber seals.
May differ from image due to multiple suppliers.
- Body Material: Brass
- Pressure Max: 12 BAR
- Input: 220V AC
- Max Temperature: 80c
*** May differ to image due to multiple suppliers and models.
Reverse Osmosis Membrane Housing with flow restrictor and tubing connectors, pre-assembled.
Fits 50GPD, 75GPD, 100GPD and 125GPD membranes.
As shown in second image.
Used in under-counter RO systems.
- xxxML / minute restriction under normal conditions.
- 1/4" Female fittings.
High flow booster pump with low energy consumption.
Technical specifications:
- Electrical connection: DC48V 2.3A
- Maximum operating pressure: 10.5 Bar
- Membrane: 2 x 200GPD or 1 x 400GPD
- Maximum output: 3.0 L/min.
- Model: HF 45L
*** May differ to images due to multiple suppliers.
Used in domestic 50GPD reverse osmosis systems.
- Diaphragm Pump.
- 3/8" Inlets
Pump only. Transformer not included but optional extra.
Tubing connectors will be required.
Advertised flow rates may vary slightly due to suppliers.
*Pump may differ to image as we have multiple suppliers.
Empty In-Line Housing with 1/4" Female Threads.
Can be filled and refilled with any filter media, mixed bed resin, carbon granules, mineral stones, etc...
Uses a rubber o-ring seal. Includes 2 sponges.
Not recommended where pressure may exceed 4 bars without using a pressure reducing valve.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.
Used to neatly insert RO 1/4" waste water tubing line into a drain pipe.
Used directly on copper pipe to attach 1/4" tubing for RO or under counter filtration systems without needing to cut the copper pipe or use additional tools or fittings.
The clamp is secured around the copper pipe and a needle-like fixture pierces the copper pipe to allow the water to flow out the 1/4" adapter where 1/4" tubing is attached.
The faucet can be turned to shut off flow also functioning as a shutoff valve.