Filters
We stock a wide range of replacement water filters.
Please select another category for more information.
If we do not have the filter you are looking for please contact us and we will try source it or provide you with an alternative.
Please select another category for more information.
If we do not have the filter you are looking for please contact us and we will try source it or provide you with an alternative.
Linear Polypropylene Cartridge K-Type (RO-PP1)
Uses:
- As an additional stage for fridges.
- In-Line Dispenser.
Contains a polypropylene sediment filter.
- Reduces Sediment, sand, dirt, rust, etc...
Do not use where the water is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit.
Reduces sediment.
Add to Cart
R172.50
Screen Mesh 20" Cartridge (PLSCRM20)
Screen filters are used for filtering debris and sediment from water. Normally used as pre-filtration for pumps to prevent pump impellor damage.
For removal of larger sediment.
- Made from polypropylene.
- Washable and Reusable.
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Reduces larger sediment.
Add to Cart
R249.55
Mineral Replacement Filter (RO-MIN)
Typically used in Reverse Osmosis Systems.
Adds minerals to Reverse Osmosis Water (Still or Distilled).
Product may look slightly different to image due to multiple suppliers being used.
Post RO filter for injection of minerals back into the water.
Add to Cart
R189.54
GAC Cartridge 20" BigBlue Refillable (GAC-BB)
*Note: Filter may differ slightly to image, sometimes they come in blue housings.
MICROFIL 20" GAC (Granular Activated Carbon) Coconut Shell based.
- Chlorine & Heavy Metal Reduction.
- Reduces unwanted taste and odours.
- Refillable.
*Note: Filter may differ slightly to image, sometimes they come in blue housings.
Refillable high quality coconut-shell granular activated carbon filter.
Add to Cart
R575.00
Ultrafiltration Membrane and Housing (UFQC)
Sock membrane inside a housing.
1/4" Quick Connect fittings on both sides and a 1/4" Female threaded side port.
Side port is used for flushing the membrane.
3 BAR MAX.
1/4" Quick Connect fittings on both sides and a 1/4" Female threaded side port.
Side port is used for flushing the membrane.
3 BAR MAX.
Removes bacteria and sediment larger than 0.01um.
Add to Cart
R345.00
pH Adjustment Filter Cartridge 20" (RM20)
This filter cartridge is used in the Standard 20" housings and contains Aquastab (Synonym: Calcite) Limestone which is composed of 80-90% Calcium Carbonate.
MSDS Sheet (194KB)
Product Info (161KB)
NEUTRALIZE WATER PH
Approximately 40% of all surface waters and virtually all the groundwaters in South Africa have a low pH, low alkalinity and low calcium. This makes the water aggressive to concrete and corrosive to metals, so it attacks pipes, conduits and reservoirs – with costly consequences. P&B AquastabTM, an inexpensive limestone product, neutralises both water and acid wastes, so it curbs corrosion. It also removes manganese, fluorides, iron and other impurities from water.
MSDS Sheet (194KB) Product Info (161KB)Re-mineralization and pH adjustment filter cartridge.
Add to Cart
R391.00
VONTRON 75GPD Reverse Osmosis Membrane (RO-M75GPDV)
Vontron ULP1812-75 Reverse Osmosis Membrane.
This membrane is rated at 75 Gallons per day (280 litres per day).
- Fits in standard 1.8" x 12" residential RO membrane housings.
VONTRON® Residential Membrane Elements
Brief Introduction
The 1812-sized and 2012-sized residential membrane elements are mainly applicable to various small-sized systems, such as household water purifier and other water purifying devices in hospital and laboratory.
Being suitable for the desalting treatment of those water sources with salt concentration lower than 2000 ppm, such as surface water, underground water, tap water and municipal water, etc., ULP series are mainly applicable to numerous applications of various sizes, such as pure water, boiler water replenishment, foodstuff processing, and pharmaceutical production, etc.
Being suitable for the desalting treatment of those water sources with salt concentration lower than 2000 ppm, such as surface water, underground water, tap water and municipal water, etc., ULP series are mainly applicable to numerous applications of various sizes, such as pure water, boiler water replenishment, foodstuff processing, and pharmaceutical production, etc.
Specifications and Major Properties
Active Membrane Area ft²(m²): 3.5(0.32)
Average Permeated Flow: 75 GPD
Stable Rejection Rate: 97.5%
Minimum Rejection Rate: 96.0%
Average Permeated Flow: 75 GPD
Stable Rejection Rate: 97.5%
Minimum Rejection Rate: 96.0%
Testing Conditions:
Testing Pressure 60 psi (0.41Mpa)
Temperature of Testing Solution 25°C
Concentration of Testing Solution (NaCl) 250ppm
pH Value of Testing Solution 7.5
Recovery Rate of Single Membrane Element 15%
Temperature of Testing Solution 25°C
Concentration of Testing Solution (NaCl) 250ppm
pH Value of Testing Solution 7.5
Recovery Rate of Single Membrane Element 15%
Extreme Operation Conditions:
Max. Working Pressure: 300psi(2.07Mpa)
Max. Feedwater Temperature: 45°C
Max. Feedwater SDI: 5
Free Chlorine Concentration of Feedwater <0.1ppm
pH Range of Feedwater during Continuous Operation: 3~10
pH Range of Feedwater during Chemical Cleaning: 2~12
Max. Pressure Drop of Single Membrane Element: 10psi(0.07Mpa)
Max. Feedwater Temperature: 45°C
Max. Feedwater SDI: 5
Free Chlorine Concentration of Feedwater <0.1ppm
pH Range of Feedwater during Continuous Operation: 3~10
pH Range of Feedwater during Chemical Cleaning: 2~12
Max. Pressure Drop of Single Membrane Element: 10psi(0.07Mpa)
Important Information
1. Any specific application must be limited within the extreme operating conditions. We strongly recommend you to refer to the latest edition of technology manual and design guide prepared by Vontron Technology Co., Ltd., or consult experts proficient in membrane technology. In case the customer fails to follow the operating conditions as specified in this manual, Vontron technology Co., Ltd. will assume no liability for all results.
2. The permeate flow listed in the table is the average value. The permeate flow of single membrane element is within a tolerance not exceeding ±20% of the nominal value.
3. All wet-type membrane elements have been strictly tested before leaving the factory, and have been treated with the solution of 1.0% sodium hydrogen sulfite (an antifreeze solution of 10% propanediol required in winter) for storage purpose, then sealed with plastic bag in vacuum, and further packed in carton boxes. In order to prevent the breeding of microbes during short-time storage, transportation and system standby, we recommend you to soak the membrane elements with protective solution (prepared with RO filtered water) containing 1.0% sodium hydrogen sulfite (foodstuff-purpose).
4. Discard the RO-filtered water produced during the first one hour after system start-up.
5. During storage time and run time, it is strictly prohibited to dose any chemical medicament that may be harmful.
2. The permeate flow listed in the table is the average value. The permeate flow of single membrane element is within a tolerance not exceeding ±20% of the nominal value.
3. All wet-type membrane elements have been strictly tested before leaving the factory, and have been treated with the solution of 1.0% sodium hydrogen sulfite (an antifreeze solution of 10% propanediol required in winter) for storage purpose, then sealed with plastic bag in vacuum, and further packed in carton boxes. In order to prevent the breeding of microbes during short-time storage, transportation and system standby, we recommend you to soak the membrane elements with protective solution (prepared with RO filtered water) containing 1.0% sodium hydrogen sulfite (foodstuff-purpose).
4. Discard the RO-filtered water produced during the first one hour after system start-up.
5. During storage time and run time, it is strictly prohibited to dose any chemical medicament that may be harmful.
High quality RO membrane.
Add to Cart
R493.35
Linear Polypropylene Cartridge (RO-PP)
Uses:
- As an additional stage for fridges.
- In-Line Dispenser.
Same housing design as the linear carbon or T33 cartridges.
Contains a polypropylene sediment filter.
- Reduces Sediment, sand, dirt, rust, etc...
Product may or may not have a label.
Do not use where the water is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit.
Reduces sediment.
Add to Cart
R172.50
Ultrafiltration 4040 Membrane 4000LPH (UF-4040)
This membrane will not fit in an RO 4040 housing they are used in our Ultrafiltration System 4040 Stainless Steel 4000LPH.
Recommended maximum 3 BAR.
Recommended maximum 3 BAR.
Removes particles larger than 0.01 micron.
Add to Cart
R4,508.00
Linear Carbon Cartridge (K-Type) (RO-LC2)
Uses:
- Final Stage on Reverse Osmosis Units.
- As a generic replacement for fridges (additional fittings may be required).
- In-Line Dispenser.
Note: This filter is bigger than the normal RO T33 Post filters, this filter is 60mm wide whereas the T33 are 50mm.
Contains Granular Activated Carbon.
- Reduces Chlorine and Heavy Metals.
- Reduces Odour & Improves Taste.
Additional fittings may be required to use in replacement of a fridge filter.
Do not use where the water is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit.
Reduces Chlorine and heavy metals. Improves odour and taste.
Add to Cart
R201.76
Replacement Filter for 15L Filter Bottle (FBFPT15)
Replacement filter for the 15L Filter Bottle.
Has o-ring and ceramic filter at bottom of cartridge as shown in image.
Reduces Chlorine and heavy metals, improves odour and taste.
Add to Cart
R138.00
Ultrafiltration Membrane In-Line (UF10IL)
1/4" Female fittings on sides, no flushing port. Will require 1/4" fittings to attach 1/4" tubing.
- 3 Bar Maximum Pressure.
- Sealed (disposable).
* May or may not have a label on depending on supplier.
- 3 Bar Maximum Pressure.
- Sealed (disposable).
* May or may not have a label on depending on supplier.
Removes bacteria and sediment larger than 0.01um.
Add to Cart
R242.11
Post Deionizing Filter for Reverse Osmosis (RO-PR)
This filter will deionize RO water to reduce the TDS to near zero.
This filter is installed after the RO process before the tank or in-line to the faucet.
Recommended to be used on RO systems with a TDS under 15. We cannot confirm if the TDS will be zero after if the TDS from the RO is over 10.
- Contains Mixed-Bed Resin.
- Media can be regenerated manually with salt.
- 1/4" Female fittings on ends.
- Reusable: Can be refilled.
This filter is installed after the RO process before the tank or in-line to the faucet.
Recommended to be used on RO systems with a TDS under 15. We cannot confirm if the TDS will be zero after if the TDS from the RO is over 10.
Reusable Ion Exchange Filter.
Add to Cart
R220.80
VONTRON 100GPD Reverse Osmosis Membrane (RO-MEM100)
VONTRON® Residential Membrane Elements
Brief Introduction
The 1812-sized residential membrane elements are mainly applicable to various small-sized systems, such as household water purifiers and other water purifying devices in hospitals and laboratories.
Being suitable for desalinization systems and water sources with salt concentration lower than 2000 ppm, such as surface water, underground water, tap water and municipal water, etc., ULP series are mainly applicable to numerous applications of various sizes, such as pure water, boiler water replenishment, foodstuff processing, and pharmaceutical production, etc.
Specifications and Major Properties
Model | Active Membrane Area ft2(m2) | Average Permeated Flow GPD (m3/d) | Stable Rejection Rate (%) | Minimum Rejection Rate (%) |
ULP1812-50 | 3.5(0.32) | 50(0.19) | 97.5 | 96.0 |
ULP1812-75 | 4.2(0.38) | 75(0.28) | 97.5 | 96.0 |
ULP1812-100 | 5.0(0.46) | 100(0.38) | 95.0 | 93.0 |
Testing Conditions: Testing Pressure…………………………………60 psi (0.41Mpa)
Temperature of Testing Solution …………..…25 ℃
Concentration of Testing Solution (NaCl)…….. 250ppm
pH Value of Testing Solution ……………….….7.5
Recovery Rate of Single Membrane Element….15%
Extreme Operation Conditions
Max. Working Pressure…………………...…….………. 300psi(2.07Mpa)
Max. Feedwater Temperature…………………….……… 45℃
Max. Feedwater SDI………………….………………….. 5
Free Chlorine Concentration of Feedwater……………… ＜0.1ppm
pH Range of Feedwater during Continuous Operation….. 3～10
pH Range of Feedwater during Chemical Cleaning……... 2～12
Max. Pressure Drop of Single Membrane Element……. 10psi(0.07Mpa)
Sizes are in mm (inch in brackets).
Important Information
1. Any specific application must be limited within the extreme operating conditions. We strongly recommend you to refer to the latest edition of technology manual and design guide prepared by Vontron Technology Co., Ltd., or consult experts proficient in membrane technology. In case the customer fails to follow the operating conditions as specified in this manual, Vontron technology Co., Ltd. will assume no liability for all results.
2. The permeate flow listed in the table is the average value. The permeate flow of single membrane element is within a tolerance not exceeding ±20% of the nominal value.
3. All wet-type membrane elements have been strictly tested before leaving the factory, and have been treated with the solution of 1.0% sodium hydrogen sulfite (an antifreeze solution of 10% propanediol required in winter) for storage purpose, then sealed with plastic bag in vacuum, and further packed in carton boxes. In order to prevent the breeding of microbes during short-time storage, transportation and system standby, we recommend you to soak the membrane elements with protective solution (prepared with RO filtered water) containing 1.0% sodium hydrogen sulfite (foodstuff-purpose).
4. Discard the RO-filtered water produced during the first one hour after system start-up.
5. During storage time and run time, it is strictly prohibited to dose any chemical medicament that may be harmful<
1812 Size.
Add to Cart
R569.25
Bio Magnet Filter 5" (BIOMAG)
Magnetic Filter with 1/4" Female Thread Inlet & Outlet.
May reduce scale.
Nanometer magnetize engergy filter.
Maximum Flow: 0.75CPM
Maximum Pressure: 125PSI
Maximum Temperature: 37C
Service Life: 1500GAL
May reduce scale.
Nanometer magnetize engergy filter.
Maximum Flow: 0.75CPM
Maximum Pressure: 125PSI
Maximum Temperature: 37C
Service Life: 1500GAL
May reduce scale.
Add to Cart
R120.05
Carbon Block (Candle Type) (CB-C10)
Carbon Block Candle Filter
- Improves taste of water.
- Reduces Chlorine.
- Reduces Odours.
Commonly used in air-to-water and reverse osmosis systems.
Fits inside a housing.
Fits in empty in-line housing.
Add to Cart
R132.25
Philips G11T5 11Watt UV Bulb (UV11T5)
11 Watt Ultra-Violet Sterilizer Bulb. 2 Pin on each side.
Glass: T-5, T5 Clear
Base: G11 BiPin
UV Emission: 254nm
Length: 152mm (incl. pins)
6,000 Average Rated Hours.
Spectral UV 253.7NM.
*These lamps are very dangerous, use only in fixtures which provide adequate protection. DANGER: This bulb emit ULTRAVIOLET RADIATION (UVC). Avoid exposure. Ultraviolet radiation is harmful to the skin and the eyes and can cause serious skin burns and eye injury either from direct or reflected radiation. To reduce the risk of personal injury, install only in a fixture which provides adequate protection to area occupants. This bulb should not be used for illumination purposes. Do not operate this bulb without personal protective equipment, hand and eye protection should be worn at all times when handling.
Made in Poland.
PLEASE NOTE: THE UV BULBS/LAMPS HAVE NO WARRANTY PER THE SUPPLIER.
UV Sterilizer Bulb.
Add to Cart
R532.15
GAC Cartridge 10" Standard (GAC-10G)
10" GAC (Granular Activated Carbon)
- Chlorine & Heavy Metal Reduction.
- Reduces Chemicals.
- Reduces unwanted taste and odours.
- Made with Coconut Shell carbon.
- High Quality, Made in Taiwan.
Granular Activated Carbon Filter Cartridge.
Add to Cart
R92.00
VONTRON ULP21-4040 Reverse Osmosis Membrane (RO-MEMULP2) 
Specifications
- Model: ULP21-4040
- Reject: 99.0%
- Average Permeate GPD(m3/d): 2400(9.1)
- Active Membrane Area ft2(m2): 90(8.4)
Brief Introduction
ULP series of ultra-low pressure aromatic polyamide compound membrane element newly developed by Vontron Technology Co. Ltd.
Membrane can operate under ultra low pressure to reach as high permeate flow and salt rejection as regular low-pressure membrane element can and is applicable to desalination of surface water and underground water.
It operates under approximately 2 thirds of the operating pressure of regular low-pressure composite membranes, and achieves a salt rejection rate of up to 99.5%, which can decrease the investment costs for relevant facilities such as pumps, piping and the operating cost for the RO system, thus increasing the economic efficiency.
Being suitable for the desalting treatment of those water sources with salt concentration lower than 2000 ppm, such as surface water, underground water, tap water and municipal water, etc., ULP series membrane elements are mainly applicable to numerous applications of various scales, such as pure water, boiler water replenishment, foodstuff processing, and pharmaceutical production, etc.
High quality 4040 RO membrane.
Add to Cart
R4,993.43
GAC Cartridge 10" Standard Refillable (GAC-10)
MICROFIL 10" GAC (Granular Activated Carbon)
- Chlorine & Heavy Metal Reduction.
- Reduces unwanted taste and odours.
- Coconut Shell.
Refillable high quality coconut-shell granular activated carbon filter.
Add to Cart
R119.00