Filters
Please select another category for more information.
If we do not have the filter you are looking for please contact us and we will try source it or provide you with an alternative.
10" GAC (Granular Activated Carbon)
- Chlorine & Heavy Metal Reduction.
- Reduces Chemicals.
- Reduces unwanted taste and odours.
- Made with Coconut Shell carbon.
- High Quality, Made in Taiwan.
Model | Active Membrane Area ft2(m2) | Average Permeated Flow GPD (m3/d) | Stable Rejection Rate (%) | Minimum Rejection Rate (%) |
ULP1812-50 | 3.5(0.32) | 50(0.19) | 97.5 | 96.0 |
ULP1812-75 | 4.2(0.38) | 75(0.28) | 97.5 | 96.0 |
ULP1812-100 | 5.0(0.46) | 100(0.38) | 95.0 | 93.0 |
- 3 Bar Maximum Pressure.
- Sealed (disposable).
* May or may not have a label on depending on supplier.
20" Standard Tannin Removal Filter Cartridge.
- Reduces or removes colour from water caused by tannins.
- Refillable.
This cartridge reduces flow rate and should not be used on in-line whole house systems.
NOTE: We have no experience with this filter and can't guarantee its effectiveness or lifespan, it is available for purchase as it has been requested in the past, we recommend having your water tested first and sending us the test results for us to determine if this filter will be suitable.
The media used in this filter is usually used in a vessel where it is regenerated and reused, the media in this filter can't be automatically regenerated so it will have to be replaced or regenerated manually.
*Cartridge may differ to image. 10" and 20" BB are also available on request.
Recommended maximum 3 BAR.
It reduces chlorine, bad taste and odour in the water, and also inhibits the formation of lime scale, which can shorten the lifespan of equipment.
This filter can be used as a Post RO filter for reverse osmosis systems or it can be used in-line with coffee machines, ice makers, fridges etc...
- Maximum Flow: 0.5 Gallon
- Maximum Pressure: 125PSI
- Temperature: 5°C - 40°C
- Service Life: 2000 Gallons
- 1/4" Female fittings on both ends.
Does not include tube connectors, they are optional.
- Reduces Chlorine & Heavy Metals.
- Reduces sediment (sand, dirt, etc.)
- Eliminates Odours & Improves Taste.
For information on KDF and all the extra impurities KDF removes please click here.
- Thermally bonded polypropylene micro fibers for purity and chemical compatibility
- Contains no binders, agents, solvents, antistatic materials or wetting agents
- Meets FDA requirements for food and beverage contact
- No leachables or extractables to contaminate
- Long life and increased dirt holding capacity
- No surface binders to reduce flow and increase change-out frequency
- Available in wide range of lengths and micron ratings
- Food and beverages
- Reverse Osmosis Prefiltration
- Oil and gas
- Fine chemicals
- Electronics
- Metal finishing
- Pulp and paper
- Fits in standard 1.8" x 12" residential RO membrane housings.
VONTRON® Residential Membrane Elements
Brief Introduction
Being suitable for the desalting treatment of those water sources with salt concentration lower than 2000 ppm, such as surface water, underground water, tap water and municipal water, etc., ULP series are mainly applicable to numerous applications of various sizes, such as pure water, boiler water replenishment, foodstuff processing, and pharmaceutical production, etc.
Specifications and Major Properties
Average Permeated Flow: 75 GPD
Stable Rejection Rate: 97.5%
Minimum Rejection Rate: 96.0%
Testing Conditions:
Temperature of Testing Solution 25°C
Concentration of Testing Solution (NaCl) 250ppm
pH Value of Testing Solution 7.5
Recovery Rate of Single Membrane Element 15%
Extreme Operation Conditions:
Max. Feedwater Temperature: 45°C
Max. Feedwater SDI: 5
Free Chlorine Concentration of Feedwater <0.1ppm
pH Range of Feedwater during Continuous Operation: 3~10
pH Range of Feedwater during Chemical Cleaning: 2~12
Max. Pressure Drop of Single Membrane Element: 10psi(0.07Mpa)
Important Information
2. The permeate flow listed in the table is the average value. The permeate flow of single membrane element is within a tolerance not exceeding ±20% of the nominal value.
3. All wet-type membrane elements have been strictly tested before leaving the factory, and have been treated with the solution of 1.0% sodium hydrogen sulfite (an antifreeze solution of 10% propanediol required in winter) for storage purpose, then sealed with plastic bag in vacuum, and further packed in carton boxes. In order to prevent the breeding of microbes during short-time storage, transportation and system standby, we recommend you to soak the membrane elements with protective solution (prepared with RO filtered water) containing 1.0% sodium hydrogen sulfite (foodstuff-purpose).
4. Discard the RO-filtered water produced during the first one hour after system start-up.
5. During storage time and run time, it is strictly prohibited to dose any chemical medicament that may be harmful.
- Reduces Sediment down to 5um (Sand, dirt, rust, etc...)
- Reduces Chlorine and Heavy Metals.
- Improves odour and taste.
- Includes 1 x Polypropylene 5um filter and 1 x Granular Activated Carbon filter.
*Actual products may differ to image due to multiple suppliers.
MICROFIL 10" Carbon Block Big Blue
- Chlorine Reduction.
- Reduces unwanted taste and odours.
MICROFIL 10" GAC (Granular Activated Carbon)
- Chlorine & Heavy Metal Reduction.
- Reduces unwanted taste and odours.
- Coconut Shell.
Reusable Pleated Cartridge 20"X 2.5" 5-Micron Sediment Filter.
Pleated cartridges outperform wound, spun, melt blown, resin bonded and other "depth" type filter elements because our cartridges are pleated to provide increased surface area and longer life.
Reduces extra-fine dirt, sand, sediment, silt, rust particles, and scale particles.
Reduces bad taste and odor, and asbestos.
Cartridge provides high flow rates and dirt holding capacity, while maintaining an extremely low-pressure drop.
Pleated design maximizes dirt-holding capacity Versatile and Reusable, allowing a variety of uses.
Durable polyester media (Non-Woven Polyester)
Core: Polypropylene
End Caps: Vinyl Plastisol
Temperature Rating: 40°F (4.4°C) to 125°F (51.7°C)
Reusable Pleated Cartridge 10"X 2.5" 5-Micron Sediment Filter.
Pleated cartridges outperform wound, spun, melt blown, resin bonded and other "depth" type filter elements because our cartridges are pleated to provide increased surface area and longer life.
Reduces extra-fine dirt, sand, sediment, silt, rust particles, and scale particles.
Reduces bad taste and odour, and asbestos.
Cartridge provides high flow rates and dirt holding capacity, while maintaining an extremely low-pressure drop.
Pleated design maximizes dirt-holding capacity Versatile and Reusable, allowing a variety of uses.
Durable polyester media (Non-Woven Polyester)
Core: Polypropylene
End Caps: Vinyl Plastisol
Temperature Rating: 4.4°C to 51.7°C
- Fits in standard 1.8" x 12" residential RO membrane housings.
VONTRON® Residential Membrane Elements
Brief Introduction
Being suitable for the desalting treatment of those water sources with salt concentration lower than 2000 ppm, such as surface water, underground water, tap water and municipal water, etc., ULP series are mainly applicable to numerous applications of various sizes, such as pure water, boiler water replenishment, foodstuff processing, and pharmaceutical production, etc.
Specifications and Major Properties
Average Permeated Flow: 50 GPD
Stable Rejection Rate: 97.5%
Minimum Rejection Rate: 96.0%
Testing Conditions:
Temperature of Testing Solution 25°C
Concentration of Testing Solution (NaCl) 250ppm
pH Value of Testing Solution 7.5
Recovery Rate of Single Membrane Element 15%
Extreme Operation Conditions:
Max. Feedwater Temperature: 45°C
Max. Feedwater SDI: 5
Free Chlorine Concentration of Feedwater <0.1ppm
pH Range of Feedwater during Continuous Operation: 3~10
pH Range of Feedwater during Chemical Cleaning: 2~12
Max. Pressure Drop of Single Membrane Element: 10psi(0.07Mpa)
Important Information
2. The permeate flow listed in the table is the average value. The permeate flow of single membrane element is within a tolerance not exceeding ±20% of the nominal value.
3. All wet-type membrane elements have been strictly tested before leaving the factory, and have been treated with the solution of 1.0% sodium hydrogen sulfite (an antifreeze solution of 10% propanediol required in winter) for storage purpose, then sealed with plastic bag in vacuum, and further packed in carton boxes. In order to prevent the breeding of microbes during short-time storage, transportation and system standby, we recommend you to soak the membrane elements with protective solution (prepared with RO filtered water) containing 1.0% sodium hydrogen sulfite (foodstuff-purpose).
4. Discard the RO-filtered water produced during the first one hour after system start-up.
5. During storage time and run time, it is strictly prohibited to dose any chemical medicament that may be harmful.
Emits FIR (Far Infrared Rays) which:
- Ionizes and activates water molecules.
- Improves oxygen levels in the body.
- Improves alkalinity of the water.
- Assist in the detoxification process within your body.
More on Bio-Ceramic filters here.
Commonly used in undercounter reverse osmosis systems.
Empty Standard 10" Filter Cartridge (use two and coupler to make 20")
Can be filled with any media such as:
- GAC (Granular Activated Carbon)
- Silica Sand
- Mixed Bed Resin
- Aquafos
- Mineral Stones
- Etc...
Reusable.
For 20 inch you have to select the optional 20 inch set.
PLEASE NOTE: THESE DO NOT FIT IN SLIMLINE HOUSINGS ONLY THE STANDARD BLUE HOUSINGS.