Valves

Used directly on copper pipe to attach 1/4" tubing for RO or under counter filtration systems without needing to cut the copper pipe or use additional tools or fittings.

The clamp is secured around the copper pipe and a needle-like fixture pierces the copper pipe to allow the water to flow out the 1/4" adapter where 1/4" tubing is attached.

The faucet can be turned to shut off flow also functioning as a shutoff valve.

• Body Material: Brass
• Pressure Max: 12 BAR
• Input: 220V AC
• Max Temperature: 80c

*** May differ to image due to multiple suppliers and models.

Pressure Reducing Valve 1/2" Adjustable

Install in-line and adjust to reduce water pressure. We recommend 4 bars or less with our filter housings.

• Adjustable.
• Reduces Water Pressure.

Plastic Pressure Reducing Valve / Pressure Regulating Valve.

• Adjustable.

Typically used in the following POU systems and appliances where water pressure exceeds 4 bars:

• Reverse Osmosis.
• Under-counter filtration units.
• Fridges
• Ice Machines
• Coffee Makers

Default adjustment is around 3.5 bars.

Used directly on copper pipe to attach 1/4" tubing for RO or under counter filtration systems without needing to cut the copper pipe or use additional tools or fittings.

The clamp is secured around the copper pipe and a needle-like fixture pierces the copper pipe to allow the water to flow out the 1/4" adapter where 1/4" tubing is attached.

The faucet can be turned to shut off flow also functioning as a shutoff valve.

Fits both 15mm and 22mm copper pipes.

*actual product may differ slightly to image.

Pressure Reducing Valve 3/4" Adjustable + Pressure Gauge

Install in-line and adjust to reduce water pressure. We recommend 4 bars with our Whole House Systems.

• Adjustable.
• Reduces Water Pressure.
• Pressure Gauge included.

Orbit Water Solenoid Valve

• Diaphragm type.
• Requires at least 1 bar of pressure (not for gravity systems).

Requires a 24V AC Power Supply (not included).

Used in domestic RO systems.

Solenoid Valve 24V DC Normally Closed.

We have multiple suppliers for these so they may differ to the pictures.

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.