Quick Connect
Quick connect fittings provide a fast, make-or-break connection of fluid transfer lines. Operated by hand, quick connect fittings replace threaded or flanged connections, which require wrenches to tighten or loosen.
First remove the retaining clip (if available), Insert tubing into fitting (requires some force), pull back gently on the tube and replace retaining clip.
Blue Retaining Clip used with Quick Connect Tube Fittings.
If no selection of size is made we will supply 1/4" clips.
1/4" (6mm) Tubing Tee with 1/4" Male Thread on Right Side.
Blue retaining clips included but not shown in image.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.
Tee 1/4" (6mm) Tubing on side and 1/4" Spigot in middle.
Spigot's can be pushed into other Quick Connect fittings.
Blue retaining clip included but not shown in image.
1/4" (6mm) Tubing Elbow to 1/8" Male Thread with One Way Check Valve built in.
Typically used with Reverse Osmosis (RO) systems, fits most standard membrane housings.
Blue retaining clip not shown in image but is included.
Note: Symptoms of faulty check valve could be storage tank not staying full or excess water down the drain line.
It is recommended to use this fitting on the permeate (clean water outlet) line to prevent risk of reverse flow.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/8" is 9.9mm.
Used for only allowing water to flow in one direction.
1/4" Tubing or 3/8" Tubing is connected on both ends.
1/4" (6mm) Tubing Elbow to 3/8" Male Thread.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 3/8" is 16.4mm.
Quick Connect Y 1/4" (6mm) Tube Around.
Provides the same function as a Tee but in a Y shape.
3/8" (9.5mm) Tubing Elbow to 3/8" Thread Male.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 3/8" is 16.4mm.
3/8" (9.5mm) Tubing to 1/4" (6mm) Tubing. Straight Reducer.
Recude 3/8" Tubing to 1/4" Tubing or visa versa.
Quick Connect 1/4" Straight to Female 1/4" Thread.
Typically used with our Pressure Gauges.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.
Fits standard 3.2 Gallon RO Storage Tanks.
Please note, due to multiple suppliers you may get the valve shown in either image. If you specifically want either one let us know in the comments of your order.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.
Plastic Ball Valve with 1/4" DCC Fittings.
Used to control flow, also used in reverse osmosis for flushing of membrane.
Quick Connect 1/4" Tube to 1/2" Female Thread Straight Connector.
Typically used on taps and faucets (12mm).
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/2" is 20.8mm.
Quick Connect 1/4" Tube to 1/4" Thread (Male).
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.