Accessories

1/4" (6mm) Tubing Elbow to 1/4" Spigot.

Spigot's can be pushed into other Quick Connect fittings.

Plastic Ball Valve with 3/8" DCC fittings.

Male to Female Chrome Plated Brass Adapter

3/4" Male to 3/4" Female with 1/4" Side Port for Ball Valve.

Short Length.

Image shows 1/2" but the product is actually 3/4 Inlet-Outlet"

Used directly on copper pipe to attach 1/4" tubing for RO or under counter filtration systems without needing to cut the copper pipe or use additional tools or fittings.

The clamp is secured around the copper pipe and a needle-like fixture pierces the copper pipe to allow the water to flow out the 1/4" adapter where 1/4" tubing is attached.

The faucet can be turned to shut off flow also functioning as a shutoff valve.

3/8" (9.5mm) Tubing Elbow to 1/2" Thread Male.

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/2" is 20.8mm.

Quick Connect Elbow 1/4" Tube to 1/4" Thread (Male)

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.

Used in domestic RO systems.

Solenoid Valve 24V DC Normally Closed.

We have multiple suppliers for these so they may differ to the pictures.

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.

Quick Connect 1/4" Tube to 1/2" Female Thread Straight Connector.

Typically used on taps and faucets (12mm).

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/2" is 20.8mm.

Quick Connect 1/4" Straight to Female 1/4" Thread.

Typically used with our Pressure Gauges.

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.

Used for only allowing water to flow in one direction.

1/4" Tubing or 3/8" Tubing is connected on both ends.

Tee 1/4" (6mm) Tubing on side and 1/4" Spigot in middle.

Spigot's can be pushed into other Quick Connect fittings.

Blue retaining clip included but not shown in image.

JACO 1/4" to JACO 1/4" Straight connector/coupler.

Used to connect 1/4" tubing.

Male to Female Chrome Plated Brass Adapter

1/2" Male to 1/2" Female with 1/4" Side Port for Ball Valve.

Long Length

JACK 1/4" Fitting with Elbow to 1/4" Thread (Male)

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.

Tee Piece with JACO fittings around.

JACO 1/4" Tube to Standard 1/4" Male

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.

• Can be used vertically or horizontally.
• Electric Switch (Normally Closed).
• Can be inverted to work in Normally Open operation.

Tee Piece with JACO fittings around.