Accessories

3/8" (9.5mm) Tubing to 3/8" Male Thread Straight Connector.

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 3/8" is 16.4mm.

Quick Connect 3/8" Tube to 3/8" Female Thread.

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 3/8" is 16.4mm.

• 0 - 999 PPM.
• Battery Powered.
• Handheld and Portable.

JACO 1/4" with Elbow to 3/8" Thread (Male).

*Image shows 1/4" thread but product is 3/8" thread.

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 3/8" is 16.4mm.

Description is in the product name, no additional information is available at the moment.

Please contact us if you have any questions about this product.

Quick Connect Tee 1/4" Tubing Around.

Typically used to "Tee In" to add a pressure gauge or low pressure switch.

JACO 3/8" Tubing with Elbow to 1/4" Thread (Male)

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.


*Image is stock image of 3/8" to 3/8".

• xxxML / minute restriction under normal conditions.
• 1/4" Female fittings.

3/8" (9.5mm) Tubing to 1/2" (12.7mm)  Male Thread

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/2" is 20.8mm.

1/4" (6mm) Tubing Elbow to 1/8" Male Thread with One Way Check Valve built in.

Typically used with Reverse Osmosis (RO) systems, fits most standard membrane housings.
Blue retaining clip not shown in image but is included.

Note: Symptoms of faulty check valve could be storage tank not staying full or excess water down the drain line.

It is recommended to use this fitting on the permeate (clean water outlet) line to prevent risk of reverse flow.

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/8" is 9.9mm.

• 400ML or 300ML / minute restriction under normal conditions.
• 1/4" Female fittings.
• Ball Valve built in for manual flushing.

Tee Piece with JACO fittings on two sides and a standard 1/4" Male thread on one end.

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.

Quick Connect Y 1/4" (6mm) Tube Around.

Provides the same function as a Tee but in a Y shape.

For use with under-counter and RO systems.

A hole must be drilled through the counter for mounting.

For use with under-counter and RO systems.

A hole must be drilled through the counter for mounting.

Note: Flow rate is faster with the elegant faucet.

Stainless Steel Ball Valve

1/4" Male Thread to 3/8" (9.5mm) Tubing

Typically used with ball valve adapters when installing point of use filtration systems such as under-counter units and reverse osmosis units.

• Reverse Osmosis
• Water Dispensers (Direct Connect)
• Aquarium Systems

Sold per meter