Accessories
Fittings, Faucets and other Addons/Accessories.
- Constant pressure invention design.
- Extend the life of RO membrane.
- Solution for water pressure fluctuation problem.
- Suitable pipe pressure 10-50 psi.
- No influence from climate and temperature.
- No decompression.
- No water leakage problem.
- Stable current makes transformer's life longer than other booster pump.
- Constant pressure technology to ensure stable pressure work on RO membrane.
Material: Cast Iron, EPDM, Santoprene, Nylon
Function: Booster Pump
Performance: No Leak
Flow: 1.6L/M @70psi
Outlet Pressure: Constant @ 70psi
Port: 3/8" FTP
Certificate: Ce, RoHS
Trademark: E-CHEN
Origin: China
Power: Electric
Liquid Media: Water
RO Capacity: 100-200 GPD
Inlet Pressure: 10psi - 50psi
Voltage: 24VDC
Adapter: 3A (Included)
Patent Product: Yes
Specification: 210x104x99mm, 2.2kg
Used to neatly insert RO 1/4" waste water tubing line into a drain pipe.
Used directly on copper pipe to attach 1/4" tubing for RO or under counter filtration systems without needing to cut the copper pipe or use additional tools or fittings.
The clamp is secured around the copper pipe and a needle-like fixture pierces the copper pipe to allow the water to flow out the 1/4" adapter where 1/4" tubing is attached.
The faucet can be turned to shut off flow also functioning as a shutoff valve.
1/4" (6mm) Tubing Elbow to 1/8" Male Thread.
Typically used with Reverse Osmosis (RO) systems for inlet and waste out, fits most standard membrane housings.
Blue retaining clip not shown in image but is included.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/8" is 9.9mm.
JACK 1/4" Fitting with Elbow to 1/4" Thread (Male)
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.
Quick Connect Tee 1/4" Tubing Around.
Typically used to "Tee In" to add a pressure gauge or low pressure switch.
Quick Connect Y 1/4" (6mm) Tube Around.
Provides the same function as a Tee but in a Y shape.
Automatically shuts off the water supply when the tank pressure (or permeate pressure) reaches ~65% of the incoming line pressure.
Without a shut-off block (or solenoid in case of RO with pump) the RO would be wasting water permanently even when the tank is full.
Quick Connect 1/4" Tube to 1/2" Female Thread Straight Connector.
Typically used on taps and faucets (12mm).
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/2" is 20.8mm.
Used to tighten and loosen filter housing when replacing membranes.
Fits standard 3.2 Gallon RO Storage Tanks.
Please note, due to multiple suppliers you may get the valve shown in either image. If you specifically want either one let us know in the comments of your order.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.
Quick Connect 3/8" Tubing to 1/2" Female Thread.
Typically used on faucets and taps (12mm).
Used to tighten and loosen filter housing when replacing cartridges.
For use with under-counter and RO systems.
A hole must be drilled through the counter for mounting.
Used to tighten and loosen filter housing when replacing cartridges.
- 0 - 999 PPM.
- Battery Powered.
- Handheld and Portable.
Available in Yellow colour only.
Fits onto existing tap, 8mm soft tubing is attached and runs to the countertop purifier.
Quick Connect 1/4" Tube to 1/4" Tube Straight Connector / Coupler.
Tee Piece with JACO fittings around.
Used directly on copper pipe to attach 1/4" tubing for RO or under counter filtration systems without needing to cut the copper pipe or use additional tools or fittings.
The clamp is secured around the copper pipe and a needle-like fixture pierces the copper pipe to allow the water to flow out the 1/4" adapter where 1/4" tubing is attached.
The faucet can be turned to shut off flow also functioning as a shutoff valve.
Fits both 15mm and 22mm copper pipes.
*actual product may differ slightly to image.