Search
Search Criteria
Products meeting the search criteria
Single bracket for 10" or 20" Big Blue filter housing wall mount.
Screw holes may not align with housing screw holes if the housings were not purchased from us, if you are unsure please contact us.
Single bracket for 10" or 20" standard filter housing wall mount.
Screw holes may not align with housing screw holes if the housings were not purchased from us, if you are unsure please contact us.
Empty In-Line Housing with 1/4" Female Threads.
Can be filled and refilled with any filter media, mixed bed resin, carbon granules, mineral stones, etc...
Uses a rubber o-ring seal. Includes 2 sponges.
Not recommended where pressure may exceed 4 bars without using a pressure reducing valve.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.
10" Filter Housing
Available in Blue & Clear (Transparent)
If your water pressure exceeds 4 bars you must install a pressure reducing valve, warranty will be void otherwise.
Max Rating 6 BAR.
Note: Blue housings are "stronger" and can withstand higher pressure.
It is recommended not to install the clear housings outdoors unless they are completely covered due to sunlight aiding bacteria/algae growth.
Housing wrench included.
20" Carbon Block Big Blue
- Chlorine & Heavy-Metals Reduction.
- Reduces unwanted taste and odours.
- Reduces Chlorine & Heavy Metals.
- Reduces sediment (sand, dirt, etc.)
- Eliminates Odours & Improves Taste.
- Available in White, Blue & Clear (Transparent, may have a purplish hue).
- Clear housings may promote growth of bacteria and algae.
- Clear housings should not be installed where they might get direct sunlight.
If you suspect that your pressure at any time may exceed 4 Bars we recommend installing a pressure reducing valve, we will not replace damaged housings where operating pressure has been exceeded.
Max Rating: 6 BAR
Housing wrench sold separately!
White and Clear Housings are only available in 1/4" and 3/8".
Blue Housings are only available in 1/2" and 3/4".
If your water pressure exceeds 4 bars you must install a pressure reducing valve, warranty will be void otherwise.
Max Rating 6 BAR.
Fits 10" BigBlue Cartridges.
Housing wrench included,
Notice: Please be advise new stock the housings are black no longer blue.
Empty In-Line Housing with 1/4" Threads for use with Candle Filter Types.
Uses a rubber o-ring seal.
Can also be used as an empty housing for filter media (such as ion-exchange resin) if you use two sponges.
Not recommended where pressure may exceed 4 bars without using a pressure reducing valve.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.
NEUTRALIZE WATER PH
Approximately 40% of all surface waters and virtually all the groundwaters in South Africa have a low pH, low alkalinity and low calcium. This makes the water aggressive to concrete and corrosive to metals, so it attacks pipes, conduits and reservoirs – with costly consequences. P&B AquastabTM, an inexpensive limestone product, neutralises both water and acid wastes, so it curbs corrosion. It also removes manganese, fluorides, iron and other impurities from water.
MSDS Sheet (194KB)
Product Info (161KB)20" GAC (Granular Activated Carbon)
- Chlorine & Heavy Metal Reduction.
- Reduces unwanted taste and odours.
- Sealed case, cannot be refilled.
- Reduces Chlorine & Heavy Metals.
- Reduces sediment (sand, dirt, etc.)
- Eliminates Odours & Improves Taste.
For information on KDF and all the extra impurities KDF removes please click here.
20" GAC (Granular Activated Carbon)
- Chlorine & Heavy Metal Reduction.
- Reduces unwanted taste and odours.
Floor Standing Bracket for 10" or 20" Three-Stage Big Blue.
Screw holes may not align with housing screw holes if the housings were not purchased from us, if you are unsure please contact us.
20" Standard Tannin Removal Filter Cartridge.
- Reduces or removes colour from water caused by tannins.
- Refillable.
This cartridge reduces flow rate and should not be used on in-line whole house systems.
NOTE: We have no experience with this filter and can't guarantee its effectiveness or lifespan, it is available for purchase as it has been requested in the past, we recommend having your water tested first and sending us the test results for us to determine if this filter will be suitable.
The media used in this filter is usually used in a vessel where it is regenerated and reused, the media in this filter can't be automatically regenerated so it will have to be replaced or regenerated manually.
*Cartridge may differ to image. 10" and 20" BB are also available on request.
Empty Standard 10" Filter Cartridge (use two and coupler to make 20")
Can be filled with any media such as:
- GAC (Granular Activated Carbon)
- Silica Sand
- Mixed Bed Resin
- Aquafos
- Mineral Stones
- Etc...
Reusable.
For 20 inch you have to select the optional 20 inch set.
PLEASE NOTE: THESE DO NOT FIT IN SLIMLINE HOUSINGS ONLY THE STANDARD BLUE HOUSINGS.
MICROFIL 10" Carbon Block
- Chlorine Reduction.
- Reduces unwanted taste and odours.
☆ Unique Advantages ☆
☆ Medical Grade High-End Technology, Anti-germs cloth is composed of Nano- Silver, Nano-Copper, Titanium Alloy Film
and KX Matrikx NSF high quality CTO carbon block filter.
☆ Anti-Bacteria up to 99.9% against Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Candida Albicans.
☆ Efficiently Remove Heavy Metal such as Lead (Pb), Chromium (Cr), Cadmium (Cd)…etc.
☆ The Filter is tested by INTERTEK / SGS / private biotechnology laboratory.
Features:
- Multilayer Nano ACT (Ag. Cu. Ti.) Complex Thin Film combined with KX Matrikx CTO Carbon Block Filter.
- Effective in Reducing Heavy Metal such as Lead (Pb), Mercury (Hg), Chromium (Cr), Cadmium (Cd).
- SGS tested report proves the specific migration of silver under US FDA standards.
- Chlorine and Odor Removal and Antibacterial Service Life.
Specification:
| Item no. | Nano-ACT20 |
| Description | 10” Nano-ACT Carbon Block CTO Filter |
| Dimension | OD 2-¾inch(70mm) X Length 20inch(508mm) |
| Carbon Filter | NSF/ANSI Standards 42 , KX Carbon Block Filter Inside |
| Inner parts | Multilayer AgCuTi Complex Thin Film Filter Inside |
| Nettings | Polyethylene, Silvery |
| Maxi. Temp. | 125℉ (51℃) |
| Notes | Performance is dependent on influent water quality, flow rates, system design and applications. |
| Notes | Recommended for use on municipal supply. |

MICROFIL 10" Carbon Block Big Blue
- Chlorine Reduction.
- Reduces unwanted taste and odours.
10" GAC (Granular Activated Carbon)
- Chlorine & Heavy Metal Reduction.
- Reduces Chemicals.
- Reduces unwanted taste and odours.
- Made with Coconut Shell carbon.
- High Quality, Made in Taiwan.