Filters
We stock a wide range of replacement water filters.
Please select another category for more information.
If we do not have the filter you are looking for please contact us and we will try source it or provide you with an alternative.
Please select another category for more information.
If we do not have the filter you are looking for please contact us and we will try source it or provide you with an alternative.
Replacement filters for triple under-counter or reverse osmosis bottom 3 filters.
Add to Cart
R200.74
GAC Cartridge 20" Standard Refillable (GAC-20)
MICROFIL 20" GAC (Granular Activated Carbon)
- Chlorine & Heavy Metal Reduction.
- Reduces unwanted taste and odours.
- Refillable.
Refillable high quality coconut-shell granular activated carbon filter.
Add to Cart
R206.10
Screen Mesh 20" Cartridge (PLSCRM20)
Screen filters are used for filtering debris and sediment from water. Normally used as pre-filtration for pumps to prevent pump impellor damage.
For removal of larger sediment.
- Made from polypropylene.
- Washable and Reusable.
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Reduces larger sediment.
Add to Cart
R249.55
Carbon Block Nano Silver 10" 5um Standard Antibacterial Cartridge (CB10NS)
☆ Unique Advantages ☆
☆ Medical Grade High-End Technology, Anti-germs cloth is composed of Nano- Silver, Nano-Copper, Titanium Alloy Film
and KX Matrikx NSF high quality CTO carbon block filter.
☆ Anti-Bacteria up to 99.9% against Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Candida Albicans.
☆ Efficiently Remove Heavy Metal such as Lead (Pb), Chromium (Cr), Cadmium (Cd)…etc.
☆ The Filter is tested by INTERTEK / SGS / private biotechnology laboratory.
Features:
- Multilayer Nano ACT (Ag. Cu. Ti.) Complex Thin Film combined with KX Matrikx CTO Carbon Block Filter.
- Effective in Reducing Heavy Metal such as Lead (Pb), Mercury (Hg), Chromium (Cr), Cadmium (Cd).
- SGS tested report proves the specific migration of silver under US FDA standards.
- Chlorine and Odor Removal and Antibacterial Service Life.
Specification:
| Item no. | Nano-ACT20 |
| Description | 10” Nano-ACT Carbon Block CTO Filter |
| Dimension | OD 2-¾inch(70mm) X Length 20inch(508mm) |
| Carbon Filter | NSF/ANSI Standards 42 , KX Carbon Block Filter Inside |
| Inner parts | Multilayer AgCuTi Complex Thin Film Filter Inside |
| Nettings | Polyethylene, Silvery |
| Maxi. Temp. | 125℉ (51℃) |
| Notes | Performance is dependent on influent water quality, flow rates, system design and applications. |
| Notes | Recommended for use on municipal supply. |
Removes bacteria, Chlorine and heavy metals. Improves odour and taste.
Add to Cart
R368.00
Carbon Block (Candle Type) (CB-C10)
Carbon Block Candle Filter
- Improves taste of water.
- Reduces Chlorine.
- Reduces Odours.
Commonly used in air-to-water and reverse osmosis systems.
Fits inside a housing.
Fits in empty in-line housing.
Add to Cart
R132.25
Triple Replacement Set 10" (SET3)
*Actual filters may differ to images due to multiple suppliers.
This set can be used in both Triple Under-Counter Systems and for the bottom 3 filters on Reverse Osmosis units.
- Reduces sediment down to 5um (sand, dirt, rust, etc...)
- Reduces Chlorine and Heavy Metals by up to 98%.
- Improves odour and taste.
- Includes 1 x Polypropylene 5um, 1 x Granular Activated Carbon and 1 x Carbon Block.
*Actual filters may differ to images due to multiple suppliers.
Replacement filters for triple under-counter or reverse osmosis bottom 3 filters.
Add to Cart
R200.74
400GPD Reverse Osmosis Membrane (RO-MEM400)
Due to multiple suppliers and brands we can not list the specifications, they are used in domestic 300GPD and 400GPD RO systems, be sure to select the correct housing size 3012 or 3013.
Confirm the size by checking the model number of your previous membrane.
Available in 3012 and 3013.
Add to Cart
R2,185.00
String Wound Sediment Filter 20" BigBlue (PFCSW20)
Reduces sediment ie: sand, dirt, rust, etc...
Reduces Sediment.
Add to Cart
R367.08
Mineral Replacement Filter (RO-MIN)
Typically used in Reverse Osmosis Systems.
Adds minerals to Reverse Osmosis Water (Still or Distilled).
Product may look slightly different to image due to multiple suppliers being used.
Post RO filter for injection of minerals back into the water.
Add to Cart
R189.54
GAC Cartridge 20" Standard (GAC-20G)
20" GAC (Granular Activated Carbon)
- Chlorine & Heavy Metal Reduction.
- Reduces unwanted taste and odours.
Reduces Chlorine and heavy metals. Improves odour and taste.
Add to Cart
R150.31
GAC Cartridge 10" Standard (GAC-10G)
10" GAC (Granular Activated Carbon)
- Chlorine & Heavy Metal Reduction.
- Reduces Chemicals.
- Reduces unwanted taste and odours.
- Made with Coconut Shell carbon.
- High Quality, Made in Taiwan.
Granular Activated Carbon Filter Cartridge.
Add to Cart
R92.00
Linear Carbon Cartridge (K-Type) (RO-LC2)
Uses:
- Final Stage on Reverse Osmosis Units.
- As a generic replacement for fridges (additional fittings may be required).
- In-Line Dispenser.
Note: This filter is bigger than the normal RO T33 Post filters, this filter is 60mm wide whereas the T33 are 50mm.
Contains Granular Activated Carbon.
- Reduces Chlorine and Heavy Metals.
- Reduces Odour & Improves Taste.
Additional fittings may be required to use in replacement of a fridge filter.
Do not use where the water is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit.
Reduces Chlorine and heavy metals. Improves odour and taste.
Add to Cart
R201.76
Carbon Block 20" Standard (CB20)
MICROFIL 20" Carbon Block
- Chlorine & Heavy-Metals Reduction.
- Reduces unwanted taste and odours.
Reduces Chlorine and heavy metals. Improves odour and taste.
Add to Cart
R170.49
Ultrafiltration Membrane In-Line (UF10IL)
1/4" Female fittings on sides, no flushing port. Will require 1/4" fittings to attach 1/4" tubing.
- 3 Bar Maximum Pressure.
- Sealed (disposable).
* May or may not have a label on depending on supplier.
- 3 Bar Maximum Pressure.
- Sealed (disposable).
* May or may not have a label on depending on supplier.
Removes bacteria and sediment larger than 0.01um.
Add to Cart
R242.11
Tannin Removal Filter Cartridge 20" (TAN20)
This cartridge reduces flow rate and should not be used on in-line whole house systems.
NOTE: We have no experience with this filter and can't guarantee its effectiveness or lifespan, it is available for purchase as it has been requested in the past, we recommend having your water tested first and sending us the test results for us to determine if this filter will be suitable.
The media used in this filter is usually used in a vessel where it is regenerated and reused, the media in this filter can't be automatically regenerated so it will have to be replaced or regenerated manually.
*Cartridge may differ to image. 10" and 20" BB are also available on request.
20" Standard Tannin Removal Filter Cartridge.
- Reduces or removes colour from water caused by tannins.
- Refillable.
This cartridge reduces flow rate and should not be used on in-line whole house systems.
NOTE: We have no experience with this filter and can't guarantee its effectiveness or lifespan, it is available for purchase as it has been requested in the past, we recommend having your water tested first and sending us the test results for us to determine if this filter will be suitable.
The media used in this filter is usually used in a vessel where it is regenerated and reused, the media in this filter can't be automatically regenerated so it will have to be replaced or regenerated manually.
*Cartridge may differ to image. 10" and 20" BB are also available on request.
Colour Removal Resin Filter Cartridge
Enquire
R529.92
Screen Mesh 10" Cartridge (PLSCM10)
Screen filters are used for filtering debris and sediment from water. Normally used as pre-filtration for pumps to prevent pump impellor damage.
For removal of larger sediment.
- Made from polypropylene.
- Washable and Reusable.
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Reduces larger sediment.
Add to Cart
R108.10
Replacement Filter for 15L Filter Bottle (FBFPT15)
Replacement filter for the 15L Filter Bottle.
Has o-ring and ceramic filter at bottom of cartridge as shown in image.
Reduces Chlorine and heavy metals, improves odour and taste.
Add to Cart
R138.00
Carbon Block 10" Standard (CB10)
MICROFIL 10" Carbon Block
- Chlorine Reduction.
- Reduces unwanted taste and odours.
Reduces Chlorine and heavy metals. Improves odour and taste.
Add to Cart
R79.99
GAC Cartridge 20" BigBlue Refillable (GAC-BB)
*Note: Filter may differ slightly to image, sometimes they come in blue housings.
MICROFIL 20" GAC (Granular Activated Carbon) Coconut Shell based.
- Chlorine & Heavy Metal Reduction.
- Reduces unwanted taste and odours.
- Refillable.
*Note: Filter may differ slightly to image, sometimes they come in blue housings.
Refillable high quality coconut-shell granular activated carbon filter.
Add to Cart
R575.00
Empty Refillable Cartridge 10" (EC-10)
The empty refillable cartridge allows you to use your own media and just replace the media instead of buying new cartridges often or if you can't find a cartridge which contains the specific media you want to use.
The empty cartridge will fit in the 10" Standard Housing or 10" Big Blue Housing as you select.
*Cartridges and colours may vary due to multiple suppliers.
The empty cartridge will fit in the 10" Standard Housing or 10" Big Blue Housing as you select.
*Cartridges and colours may vary due to multiple suppliers.
Empty cartridge to be filled with your own media.
Add to Cart
R100.05
VONTRON 75GPD Reverse Osmosis Membrane (RO-M75GPDV)
Vontron ULP1812-75 Reverse Osmosis Membrane.
This membrane is rated at 75 Gallons per day (280 litres per day).
- Fits in standard 1.8" x 12" residential RO membrane housings.
VONTRON® Residential Membrane Elements
Brief Introduction
The 1812-sized and 2012-sized residential membrane elements are mainly applicable to various small-sized systems, such as household water purifier and other water purifying devices in hospital and laboratory.
Being suitable for the desalting treatment of those water sources with salt concentration lower than 2000 ppm, such as surface water, underground water, tap water and municipal water, etc., ULP series are mainly applicable to numerous applications of various sizes, such as pure water, boiler water replenishment, foodstuff processing, and pharmaceutical production, etc.
Being suitable for the desalting treatment of those water sources with salt concentration lower than 2000 ppm, such as surface water, underground water, tap water and municipal water, etc., ULP series are mainly applicable to numerous applications of various sizes, such as pure water, boiler water replenishment, foodstuff processing, and pharmaceutical production, etc.
Specifications and Major Properties
Active Membrane Area ft²(m²): 3.5(0.32)
Average Permeated Flow: 75 GPD
Stable Rejection Rate: 97.5%
Minimum Rejection Rate: 96.0%
Average Permeated Flow: 75 GPD
Stable Rejection Rate: 97.5%
Minimum Rejection Rate: 96.0%
Testing Conditions:
Testing Pressure 60 psi (0.41Mpa)
Temperature of Testing Solution 25°C
Concentration of Testing Solution (NaCl) 250ppm
pH Value of Testing Solution 7.5
Recovery Rate of Single Membrane Element 15%
Temperature of Testing Solution 25°C
Concentration of Testing Solution (NaCl) 250ppm
pH Value of Testing Solution 7.5
Recovery Rate of Single Membrane Element 15%
Extreme Operation Conditions:
Max. Working Pressure: 300psi(2.07Mpa)
Max. Feedwater Temperature: 45°C
Max. Feedwater SDI: 5
Free Chlorine Concentration of Feedwater <0.1ppm
pH Range of Feedwater during Continuous Operation: 3~10
pH Range of Feedwater during Chemical Cleaning: 2~12
Max. Pressure Drop of Single Membrane Element: 10psi(0.07Mpa)
Max. Feedwater Temperature: 45°C
Max. Feedwater SDI: 5
Free Chlorine Concentration of Feedwater <0.1ppm
pH Range of Feedwater during Continuous Operation: 3~10
pH Range of Feedwater during Chemical Cleaning: 2~12
Max. Pressure Drop of Single Membrane Element: 10psi(0.07Mpa)
Important Information
1. Any specific application must be limited within the extreme operating conditions. We strongly recommend you to refer to the latest edition of technology manual and design guide prepared by Vontron Technology Co., Ltd., or consult experts proficient in membrane technology. In case the customer fails to follow the operating conditions as specified in this manual, Vontron technology Co., Ltd. will assume no liability for all results.
2. The permeate flow listed in the table is the average value. The permeate flow of single membrane element is within a tolerance not exceeding ±20% of the nominal value.
3. All wet-type membrane elements have been strictly tested before leaving the factory, and have been treated with the solution of 1.0% sodium hydrogen sulfite (an antifreeze solution of 10% propanediol required in winter) for storage purpose, then sealed with plastic bag in vacuum, and further packed in carton boxes. In order to prevent the breeding of microbes during short-time storage, transportation and system standby, we recommend you to soak the membrane elements with protective solution (prepared with RO filtered water) containing 1.0% sodium hydrogen sulfite (foodstuff-purpose).
4. Discard the RO-filtered water produced during the first one hour after system start-up.
5. During storage time and run time, it is strictly prohibited to dose any chemical medicament that may be harmful.
2. The permeate flow listed in the table is the average value. The permeate flow of single membrane element is within a tolerance not exceeding ±20% of the nominal value.
3. All wet-type membrane elements have been strictly tested before leaving the factory, and have been treated with the solution of 1.0% sodium hydrogen sulfite (an antifreeze solution of 10% propanediol required in winter) for storage purpose, then sealed with plastic bag in vacuum, and further packed in carton boxes. In order to prevent the breeding of microbes during short-time storage, transportation and system standby, we recommend you to soak the membrane elements with protective solution (prepared with RO filtered water) containing 1.0% sodium hydrogen sulfite (foodstuff-purpose).
4. Discard the RO-filtered water produced during the first one hour after system start-up.
5. During storage time and run time, it is strictly prohibited to dose any chemical medicament that may be harmful.
High quality RO membrane.
Add to Cart
R493.35