Reverse Osmosis Spares
RO Spares & Accessories
Cap only which includes 2 rubber seals.
Image shown is a 4040 end cap for illustration only.
Automatically shuts off the water supply when the tank pressure (or permeate pressure) reaches ~65% of the incoming line pressure.
Without a shut-off block (or solenoid in case of RO with pump) the RO would be wasting water permanently even when the tank is full.
- Constant pressure invention design.
- Extend the life of RO membrane.
- Solution for water pressure fluctuation problem.
- Suitable pipe pressure 10-50 psi.
- No influence from climate and temperature.
- No decompression.
- No water leakage problem.
- Stable current makes transformer's life longer than other booster pump.
- Constant pressure technology to ensure stable pressure work on RO membrane.
Material: Cast Iron, EPDM, Santoprene, Nylon
Function: Booster Pump
Performance: No Leak
Flow: 1.6L/M @70psi
Outlet Pressure: Constant @ 70psi
Port: 3/8" FTP
Certificate: Ce, RoHS
Trademark: E-CHEN
Origin: China
Power: Electric
Liquid Media: Water
RO Capacity: 100-200 GPD
Inlet Pressure: 10psi - 50psi
Voltage: 24VDC
Adapter: 3A (Included)
Patent Product: Yes
Specification: 210x104x99mm, 2.2kg
Reverse Osmosis Membrane Housing with flow restrictor and tubing connectors, pre-assembled.
Fits 50GPD, 75GPD, 100GPD and 125GPD membranes.
As shown in second image.
Reverse Osmosis Membrane Housing.
Fits 50GPD, 75GPD, 100GPD and 125GPD membranes.
Inlet, Permeate and Waste are all 1/8" Female Thread.
We recommend using the one-way check valve on the permeate to prevent reverse flow.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/8" is 9.9mm.
Used to neatly insert RO 1/4" waste water tubing line into a drain pipe.
High flow booster pump with low energy consumption.
Technical specifications:
- Electrical connection: DC48V 2.3A
- Maximum operating pressure: 10.5 Bar
- Membrane: 2 x 200GPD or 1 x 400GPD
- Maximum output: 3.0 L/min.
- Model: HF 45L
*** May differ to images due to multiple suppliers.
Used directly on copper pipe to attach 1/4" tubing for RO or under counter filtration systems without needing to cut the copper pipe or use additional tools or fittings.
The clamp is secured around the copper pipe and a needle-like fixture pierces the copper pipe to allow the water to flow out the 1/4" adapter where 1/4" tubing is attached.
The faucet can be turned to shut off flow also functioning as a shutoff valve.
Fits both 15mm and 22mm copper pipes.
*actual product may differ slightly to image.
- Normally Closed.
*Note: The optional "1/4" Female Thread (Black) 15A" can be used with two of the 1/4" Thread to 3/8" Tubing Adapters for use with 300GPD and up RO units.
This system works with any 10" Single, Dual or Triple Stage Under-Counter Filtration System or RO (Reverse Osmosis) System.
Standard 1/4" Inlet and Outlet.
The leaked-water accumulates in the holding tray and triggers shutoff of the supply.
*Does not include the RO system shown in the image.
Video Demonstration:
Used to power RO Booster pumps and solenoids in domestic RO systems.
*May differ slightly to image due to multiple suppliers, some have connectors and some have only wires.
***The 3AMP and higher ones are switching power supplies in a flatter and longer enclosure, the smaller ones are linear power supplies.
Used directly on copper pipe to attach 1/4" tubing for RO or under counter filtration systems without needing to cut the copper pipe or use additional tools or fittings.
The clamp is secured around the copper pipe and a needle-like fixture pierces the copper pipe to allow the water to flow out the 1/4" adapter where 1/4" tubing is attached.
The faucet can be turned to shut off flow also functioning as a shutoff valve.
Used in under-counter RO systems.
- xxxML / minute restriction under normal conditions.
- 1/4" Female fittings.
Used in under-counter RO systems.
- 400ML or 300ML / minute restriction under normal conditions.
- 1/4" Female fittings.
- Ball Valve built in for manual flushing.
- Body Material: Brass
- Pressure Max: 12 BAR
- Input: 220V AC
- Max Temperature: 80c
*** May differ to image due to multiple suppliers and models.
Empty In-Line Housing with 1/4" Female Threads.
Can be filled and refilled with any filter media, mixed bed resin, carbon granules, mineral stones, etc...
Uses a rubber o-ring seal. Includes 2 sponges.
Not recommended where pressure may exceed 4 bars without using a pressure reducing valve.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.
Used in domestic RO systems.
Solenoid Valve 24V DC Normally Closed.
We have multiple suppliers for these so they may differ to the pictures.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.
Empty In-Line Housing with 1/4" Threads for use with Candle Filter Types.
Uses a rubber o-ring seal.
Can also be used as an empty housing for filter media (such as ion-exchange resin) if you use two sponges.
Not recommended where pressure may exceed 4 bars without using a pressure reducing valve.
Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.
Cap only which includes 2 rubber seals.
May differ from image due to multiple suppliers.
Reverse Osmosis Membrane Housing.
Fits 300GPD membranes.
We recommend using the one-way check valve on the permeate to prevent reverse flow.
*Product may differ slightly to image.