Reverse Osmosis Spares

Used in domestic RO systems.

Solenoid Valve 24V DC Normally Closed.

We have multiple suppliers for these so they may differ to the pictures.

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.

Empty In-Line Housing with 1/4" Female Threads.

Can be filled and refilled with any filter media, mixed bed resin, carbon granules, mineral stones, etc...

Uses a rubber o-ring seal. Includes 2 sponges.

Not recommended where pressure may exceed 4 bars without using a pressure reducing valve.

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.

Empty In-Line Housing with 1/4" Threads for use with Candle Filter Types.

Uses a rubber o-ring seal.
Can also be used as an empty housing for filter media (such as ion-exchange resin) if you use two sponges.

Not recommended where pressure may exceed 4 bars without using a pressure reducing valve.

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.

Used directly on copper pipe to attach 1/4" tubing for RO or under counter filtration systems without needing to cut the copper pipe or use additional tools or fittings.

The clamp is secured around the copper pipe and a needle-like fixture pierces the copper pipe to allow the water to flow out the 1/4" adapter where 1/4" tubing is attached.

The faucet can be turned to shut off flow also functioning as a shutoff valve.

Fits both 15mm and 22mm copper pipes.

*actual product may differ slightly to image.

• Constant pressure invention design.
• Extend the life of RO membrane.
• Solution for water pressure fluctuation problem.
• Suitable pipe pressure 10-50 psi.
• No influence from climate and temperature.
• No decompression.
• No water leakage problem.
• Stable current makes transformer's life longer than other booster pump.
• Constant pressure technology to ensure stable pressure work on RO membrane.

Used in domestic 50GPD or 100GPD reverse osmosis systems.

• Diaphragm Pump.
• Pump and Transformer Included.

Standard female 3/8" Inlet and Outlet.

Voltage: 24V DC
Current: 0.42A, (0.6A Max)
Open Flow: 58LPH (15.3GPH)
Medium: Water
Inlet Pressure: 0.2 MPa (29PSI) Min: 0.05 MPa (7.3PSI) Max: 0.4 MPa (58PSI).
Working Pressure: 0.56MPa (81PSI)
Working Flow: 28LPH (6.9GPH)
Bypass Pressure: 0.70MPa (100PSI) - 0.86MPa (125PSI) MAX
Temperature: 25C

Caution: Motor duty cycle will vary with load and ambient temperature.

• 400ML or 300ML / minute restriction under normal conditions.
• 1/4" Female fittings.
• Ball Valve built in for manual flushing.

Used directly on copper pipe to attach 1/4" tubing for RO or under counter filtration systems without needing to cut the copper pipe or use additional tools or fittings.

The clamp is secured around the copper pipe and a needle-like fixture pierces the copper pipe to allow the water to flow out the 1/4" adapter where 1/4" tubing is attached.

The faucet can be turned to shut off flow also functioning as a shutoff valve.

• Body Material: Brass
• Pressure Max: 12 BAR
• Input: 220V AC
• Max Temperature: 80c

*** May differ to image due to multiple suppliers and models.

Used to power RO Booster pumps and solenoids in domestic RO systems.

*May differ slightly to image due to multiple suppliers, some have connectors and some have only wires.

***The 3AMP and higher ones are switching power supplies in a flatter and longer enclosure, the smaller ones are linear power supplies.

Used to neatly insert RO 1/4" waste water tubing line into a drain pipe.

Reverse Osmosis Membrane Housing.

Fits 300GPD membranes.

We recommend using the one-way check valve on the permeate to prevent reverse flow.

*Product may differ slightly to image.

High flow booster pump with low energy consumption.

Technical specifications:

• Electrical connection: DC48V 2.3A
• Maximum operating pressure: 10.5 Bar
• Membrane: 2 x 200GPD or 1 x 400GPD
• Maximum output: 3.0 L/min.
• Model: HF 45L

Reverse Osmosis Membrane Housing with flow restrictor and tubing connectors, pre-assembled.

Fits 50GPD, 75GPD, 100GPD and 125GPD membranes.

As shown in second image.

• xxxML / minute restriction under normal conditions.
• 1/4" Female fittings.