Housings & Vessels

FRP Membrane Housing for Size 4040 Reverse Osmosis Membranes.

Technical information available on request.

• Available in White, Blue & Clear (Transparent, may have a purplish hue).
• Clear housings may promote growth of bacteria and algae.
• Clear housings should not be installed where they might get direct sunlight.

Reverse Osmosis Membrane Housing with flow restrictor and tubing connectors, pre-assembled.

Fits 50GPD, 75GPD, 100GPD and 125GPD membranes.

As shown in second image.

Stainless Steel Membrane Housing for Size 4040 Reverse Osmosis Membranes.

Technical information available on request.

Reverse Osmosis Membrane Housing.

Fits 50GPD, 75GPD, 100GPD and 125GPD membranes.

Inlet, Permeate and Waste are all 1/8" Female Thread.

We recommend using the one-way check valve on the permeate to prevent reverse flow.

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/8" is 9.9mm.

If your water pressure exceeds 4 bars you must install a pressure reducing valve, warranty will be void otherwise.

Max Rating 6 BAR.

Fits 10" BigBlue Cartridges.

Housing wrench included,

Notice: Please be advise new stock the housings are black no longer blue.

20" Filter Housing

Available in Blue & Clear (Transparent)

Pressure reducing valve required if exceeding 4 BAR of pressure or else there will be no warranty.

Max Rating: 6 BAR

Note: Blue housings are "stronger" and can withstand higher pressure.

It is recommended not to install the clear housings outdoors unless they are completely covered due to sunlight aiding bacteria/algae growth.

Housing wrench included.

10" Filter Housing

Available in Blue & Clear (Transparent)

If your water pressure exceeds 4 bars you must install a pressure reducing valve, warranty will be void otherwise.

Max Rating 6 BAR.

Note: Blue housings are "stronger" and can withstand higher pressure.

It is recommended not to install the clear housings outdoors unless they are completely covered due to sunlight aiding bacteria/algae growth.

Housing wrench included.

Empty In-Line Housing with 1/4" Female Threads.

Can be filled and refilled with any filter media, mixed bed resin, carbon granules, mineral stones, etc...

Uses a rubber o-ring seal. Includes 2 sponges.

Not recommended where pressure may exceed 4 bars without using a pressure reducing valve.

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.

Empty In-Line Housing with 1/4" Threads for use with Candle Filter Types.

Uses a rubber o-ring seal.
Can also be used as an empty housing for filter media (such as ion-exchange resin) if you use two sponges.

Not recommended where pressure may exceed 4 bars without using a pressure reducing valve.

Please Note: The thread fittings are not outer diameter measurements, the outer diameter measurement for 1/4" is 12.9mm.

If your water pressure exceeds 4 bars you must install a pressure reducing valve, warranty will be void otherwise.

Max Rating 6 BAR.

Fits 20" BigBlue Cartridges.

Housing wrench included.

Reverse Osmosis Membrane Housing.

Fits 300GPD membranes.

We recommend using the one-way check valve on the permeate to prevent reverse flow.

*Product may differ slightly to image.